Installing and Removing Components
5-2 AlphaServer 1000A Rackmount Owner’s Guide
Preparing to Install or Remove Components
To prepare your system for installation and removal of components, you need to assemble
the required equipment, be familiar with anti-static precautions, and remove the top of the
system unit.
Required Equipment
You need the following equipment to perform the installation and removal procedures
described in the following sections.
•
Flat-head screwdriver
•
Phillips-head screwdriver
•
Antistatic wriststrap
•
Replacement option board kit or device kit, if necessary
Antistatic Precautions
When you handle internal system components, use an antistatic wriststrap to avoid
damaging the components.
_________________________Caution____________________________
Do not disconnect the system unit power cord or unplug the power cord from the
power supply socket. The power cord grounds the system unit, and prevents
damage to the internal components.
____________________________________________________________
