Characteristics and Specifications
A-7
0B
08
01
LIBRARY COMMUNICATION TIME-OUT
ER_LU_COM_TO
QSPI communications not responding. Retry command.
Both
5
1A
00
PARAMETER LIST LENGTH ERROR
Invalid parameter list length field specified by command.
SCSI
5
20
00
INVALID COMMAND OPERATION CODE
Verify the host command format.
SCSI
5
21
01
INVALID ELEMENT ADDRESS
Check Mode Sense data for correct element addresses.
SCSI
5
24
00
INVALID FIELD IN COMMAND DATA BLOCK
Ensure all reserve fields are set to zero.
SCSI
5
25
00
LOGICAL UNIT IS NOT SUPPORTED
Verify the logical unit field specified in the command
contains a legitimate logical unit number. Check cabling
to logical unit.
SCSI
5
26
00
INVALID FIELD IN PARAMETER LIST
Verify Mode Select page fields. Verify that fields comply
with the command format described in this guide.
SCSI
5
26
02
PARAMETER VALUE INVALID
Verify Mode Select page fields. Verify that fields comply
with the command format described in this guide.
This response will also be returned for commands issued
to the diagnostic interface of the library if an invalid
parameter is sent.
Both
6
28
01
IMPORT OR EXPORT ELEMENT ACCESSED
Load port door has been closed.
Both
6
29
00
POWER-ON, OR BUS DEVICE RESET OCCURRED
Informational message. If power on occurs, the host user
should assume the inventory might have been corrupted,
and should ask the library for that information again.
Both
Table A-4 Sense Data Values (Hexadecimal) (Continued)
Sense
Key
ASC
ASCQ
Message Name/Description
Interface