5-10
Compaq StorageWorks ESL9000 Series Tape Library Reference Guide
Performing a System Test
To perform a system test:
1. On the Service screen, press the
SysTest Library
button. The control panel displays
the Test: SysTest Library screen (see Figure 5-9).
Figure 5-9. Test: SysTest Library screen
2. Select one of the following system test options:
a. Swap Bins - test storage bins only
b. Swap Drives - test drives only
c. Swap Bins and Drives - test bins and drives
3. Select all desired test options as follows:
a. Random - swap cartridges at random
b. Barcode - read barcode as cartridges are swapped
c. Continuous - repeat test until aborted
NOTE:
The
Continuous
button must be deselected to enter # of Runs.
System
Off-line
Standby
Load Port
Back
Forward
Home
S
Test: Systest Library
Select
Execute
Use
Barcodes
9
0
7
8
5
6
3
4
1
2
Stop
Random
Swap
Bins
Swap
Drives
_
Continuous
# of Runs:
Service
Operator
Tapes