background image

Product Features

 

8.  Press the Minus or Plus buttons to adjust the minutes. 

9.  Press the Menu button to lock in the time chosen. 

10.  After setting the current time, the highlight automatically 

skips to Set Sleep Time "hours." Repeat steps 6 through 9 to 
set Sleep Time. 

11.  If you do not want to set Sleep Time, press the Menu button 

twice, then select Save and Return to exit the menu. 

12.  After setting Sleep Time, the highlight automatically skips to 

Set On Time "hours." Repeat steps 6 through 9 to set On 
Time. 

13.  Set the Timer mode to On to activate the Sleep Timer 

settings. 

14.  When you are finished, select Save and Return to exit the 

menu. 

The fifth selection Sleep Now turns the monitor backlights off 
immediately and stays in sleep mode until the next On Time 
activates or a monitor button is pressed. 

Adjusting Screen Quality 

Allow the monitor to warm up for 20 minutes before performing 
the following procedures.  

The Auto Adjustment feature in the OSD automatically fine-tunes 
the image quality each time a new video mode is utilized. If 
additional improvement is desired, select "Auto Adjust" in the 
Basic Menu. 

For more precise adjustments, use the Compaq LCD Display 
Assistant utility included on the CD-ROM. This utility 
graphically illustrates how to  adjust the Clock and Clock Phase 
controls explained in the Optimizing Digital Conversion section 
below. 

Compaq TFT5030 Flat Panel Monitor User’s Guide 

19

 

Summary of Contents for 5030 - TFT - 15.1" LCD Monitor
































Reviews: