3-4
Compaq 3U RM Storage Enclosure Reference Guide
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq 3U RM Storage Enclosure Reference Guide Comments:
Part Number: File Name: d-ch3 Installiing the 3U RM Storage Enclosure into a Rack.doc Last Saved On: 3/27/01 3:25 PM
9.
From the rear of the rack, align the cable rack bracket with the hole in
the spring-loaded rack rail and secure it with an M6 x 1.0-12L Phillips
screw.
.
Figure 3-4. Attaching the cable rack bracket
10.
Tighten the thumbscrew into the spring-loaded rack rail.
11.
Align the rear of the storage enclosure rails with the front end of the
spring-loaded rack rails, then push it fully into the rack. Tighten the
front panel thumbscrews.
CAUTION:
Be sure to keep the component parallel to the floor when sliding the
storage enclosure into the spring-loaded rack rails. Tilting the component up or
down could result in damage to the rails.
Figure 3-5. Loading the 3U RM Storage Enclosure
12.
Plug an external SCSI cable from the SCSI controller to the SCSI
connector on the back of the chassis.
