Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq 3U RM Storage Enclosure Reference Guide Comments:
Part Number: File Name: d-ch3 Installiing the 3U RM Storage Enclosure into a Rack.doc Last Saved On: 3/27/01 3:25 PM
Chapter
3
Installing the 3U RM Storage Enclosure
into a Compaq Rack
Introduction
This chapter discusses the following topics:
■
Rack Mounting Kit
■
Installing the storage enclosure
Rack Mounting Kit
The Rack Mounting Kit that ships with the Compaq 3U RM Storage Enclosure
contains:
■
A template to mark the rack for proper alignment of rack-mounting
brackets.
■
A cable management system consisting of a cable reel and cable rack
bracket.
NOTE:
You will need a Phillips screwdriver #2 to install the cable management system.
Also, you will need two M6 x 1.0-12L Phillips screws that came with your rack.
■
A pair of spring-loaded rails.
NOTE:
If you are using an Alpha “round hole” rack, you will need to obtain the 3U Rail
Extender Kit listed in Table 1-1, 3U RM Storage Enclosure Options.
