51
Fig 26 – Lines, pins (turnposts) and figures of eight
9.8 Stowing the lines
Release the bridle tension.
Take particular care that the bridle does not tangle with or go through the suspension
lines!
To stow the suspension lines it is easiest, to use a board with correctly spaced pins/posts. The pins
should be set at a lateral distance equivalent to the width of the inner container, e.g. approximately
20 cm for the SQR inner container (see Fig 26).
The lines make turns around the pins in simple figure of eight fashion as shown above. Fig 26 shows
a right turn around the right hand post as the first turnpoint, followed by a left turn around the next
turnpoint. The initial direction is your choice, but a consistent figure of eight pattern (Fig 27) should
be followed!
