41
Fig 12 – Pull out the top and bottom corners for a
flat result
Fig 13 – Bottom edges in a straight line
When you lay each panel out make sure the lines stay in the centre (line holder) and that the folded
panels are pulled flat. Make sure the panels lie neatly one on the other, and that the bottom edges
make a straight line. It is worth recommending, that you first hold a bottom corner of each panel in
position (1.), then pull out the top corner (2.) for a flat result (Fig 12).
If you clamp the bottom edge corners (1. on Fig 12) of the already flattened panels with the fingers
from one hand, you can avoid mixing up the panel order and will get a neater, ordered bottom edge
(Fig 13).
