49
Fig 23 – Adapting to the container length for the remain-
ing folds
Fig 24 – Upwards S-folds to match the container length.
Remove the packing line!!!
9.6 Matching the inner container length
The canopy is now ready to go into the container. Measure the S-fold length required from the can-
opy edge upwards (Fig 23).
Start at the lowest fold and lift the same length of bundle over, sliding the remaining canopy
towards you. Do this carefully so, as not to ruin your previous work. Packing clamps or weights at
the fold lines will help (Fig 23).
Remove the packing line from the packing loops!
the final result. Check that all your packing equipment is present. Do not leave anything inside the
canopy (accessory checklist)!
