16
Measurement of opening speed and the shock test parameters required during certi-
fication were carried out using the original SQR inner container as delivered from the
factory. A deployment in a different inner container could lead to different results!
If installing into an integrated inner container, the reserve should be
removed
from the factory de-
livered inner container! Depending on your configuration, sometimes a partial or full repack of the
reserve is required, so that it matches the shape/size of the integrated container to be used.
The packing section (Chapter 9)
of the manual gives detailed instructions how to do this. A look at
the Companion online video about packing and folding to size is strongly recommended:
https://youtu.be/f6M1KMbGZ70.
To confirm that the reserve has been correctly installed, a compatibility test is abso
-
lutely essential in case of a new installation or if any element of the complete har-
ness/container/reserve system has been changed!
6.2 Installing in the SQR inner container
The SQR reserves are delivered from the factory in the
SQR inner container.
If your harness does
not have its own inner container for the reserve compartment, or the manufacturer allows the use
of third party inner containers, you should use the SQR inner container, as supplied from the
factory.
Take care to choose the correct inner container attachment loop. There is a choice of two loops for
attaching the reserve handle (see Fig 3). Which to use depends on the length of line from the handle
and the shape and position of your harness reserve compartment. Please follow the advice in your
harness manual.
