7
6. PACKING
When packing the cooker away ensure that it
has cooled and there are no areas of heat.
1. Disconnect the LP Gas hose from the gas control
assembly. The gas control assembly does not need to
be removed from burner tube.
2. Unscrew wing nut on
base of burner and
remove reflector plate
and burner assembly
from cooker frame.
3. Place basket inside pot then position cooker frame over
pot and allow to slide inside.
4. Place burner, reflector plate, hose and regulator
assembly into the pot and install lid on top the place
inside storage bag.
CARE INSTRUCTIONS
Using warm soapy water with a mild detergent wipe
down all surfaces and areas of the appliance, taking
care not to allow water to enter the burner outlets
or aeration holes located in the burner tube.
DO NOT
submerge the appliance in a sink or bowl
DO NOT
use abrasive cleaners or bleach
MAINTENANCE AND SERVICE
• During operation if it is noted that the burner flame
is unstable, is changing colour from Blue to Yellow
or has a distinct smell it is important that you take
the appliance to your local authorised gas appliance
repairer for inspection.
• Periodically check the gas control is tight and has no
leaks, follow the testing for leaks procedure. Check
the gas hose & regulator for any signs of wear, cuts or
fraying, if identified replace immediately with a Gas
Certified replacement hose and/ or regulator
• For further information or assistance please contact
customer service.
