7
40AH POWER STATION
CHARGING BY DC CABLE (INCLUDED)
Step 1.
Turn on the power station by holding the power button for three seconds.
Step 2.
Insert the adaptor plug into the input socket on the side of the power station and the DC charger to your power
source.
Step 3.
The power station will automatically begin to charge. The battery status will be shown on the LCD display and
will also show the minutes remaining until fully charged. Note: The LCD display will show the total input/output as
described in the “Understanding your LCD Display” section of the manual
Step 4.
The power station will automatically turn off when it is fully charged.
Note:
Charge time will vary based on the DC power source
