8
Charging by Solar Panel (not included)
The power station has a built in MPPT controller so you do not need to use a solar ccontroller. The solar panel MUST be
connected directly to the power station with unregulated solar.
Step 1
. Turn on the power station by holding the power button for three seconds.
Step 2.
Insert the adaptor plug into the input socket on the side of the power station and other lead to your solar panel
Anderson connector.
Step 3.
The power station will automatically begin to charge. The battery status will be shown on the LCD display and
will also show the minutes remaining until fully charged.
Step 4.
The power station will automatically turn off when it is fully charged.
Note:
The charging input is
5 Amp max
, so a 120W panel would charge the battery in approx. 8-10 hours.
