8 The BIOS Setup Program
User’s Manual
8-9
The formats of the password are as follows:
Length:
Maximum 8 characters.
Characters:
Alphanumeric keys only. The shift status, i.e. Ctrl, Shift,
Alt, and Capital, is ignored.
8.5.3 Set HDD User Password
A message is always shown when entering this field. When this field is
highlighted, press [Enter] as the following message is shown:
Enter New
Password
[ ]
Press [Enter] when the following message is shown:
Confirm
New
Password
[ ]
If an old password exists, the setup will prompt with the following window
instead and a current password will be required to be entered at first:
Enter Current
Password
[ ]
Press [Enter] when the following message is shown:
Enter New
Password
[ ]
Press [Enter] the following message is shown:
Confirm
New
Password
[ ]
If password on boot is required, the password must be set; otherwise it
cannot be enabled.
The formats of the password are as follows:
Length:
Maximum 8 characters.
Characters:
Alphanumeric keys only. The shift status, i.e. Ctrl, Shift,
Alt, and Capital, is ignored.
Summary of Contents for JFT00
Page 32: ......
