Comnet CWGE2FE8MSPOE, Installation And Operation Manual

Page: 32 / 143

25
bandwidth out
[Value]
Set interface output
bandwidth. Rate
Range is from 100
kbps to 102400 kbps
or to 256000 kbps for
giga ports,
and zero means no
limit.
switch(config)# interface
fastEthernet 2
switch(config-if)# bandwidth out
100
show bandwidth I Show interfaces
bandwidth control
switch(config)# interface
fastEthernet 2
switch(config-if)# show bandwidth
state
[Enable | Disable]
I Use the state interface
configuration
command to specify
the state mode of
operation for Ethernet
ports. Use the disable
form of this command
to disable the port.
switch(config)# interface
fastEthernet 2
switch(config-if)# state Disable
show interface
configuration
I show interface
configuration status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
configuration
show interface status I show interface actual
status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
status