Comnet CWGE2FE8MSPOE, Installation And Operation Manual

Page: 25 / 143

18
CLI Management
The system supports console management—CLI command. After you log in to the system,
you will see a command prompt. To enter CLI management interface, enter “ enable ”
command. The following table lists the CLI commands and description.
CLI command interface
Commands Level
Modes
Access
Method
Prompt
Exit
Method
About This Mode1
User
EXEC
Begin a
session with
your switch.
switch>
Enter
logout or
quit.
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command
while in user
EXEC mode.
switch#
Enter
disable to
exit.
The privileged command is
in advanced mode
Privileged this mode to
• Display advanced
function status
• Save configuration
Global Enter the switch To exit to Use this mode to configure