Comnet CWGE2FE8MSPOE, Installation And Operation Manual

Page: 35 / 143

28
aggregator group
[GroupID] [Port-list]
nolacp
G Assign a static trunk
group.
[GroupID] :1~4
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
switch(config)# aggregator group
1 2-4 nolacp
or
switch(config)# aggregator group
1 3,1,2 nolacp
show aggregator P Show the information
of trunk group
switch# show aggregator 1
or
switch# show aggregator 2
or
switch# show aggregator 3
no aggregator lacp
[GroupID]
G Disable the LACP
function of trunk group
switch(config)# no aggreator lacp
1
no aggregator group
[GroupID]
G Remove a trunk group switch(config)# no aggreator
group 2
VLAN Commands Set
Netstar Commands Level Description Example
vlan database P Enter VLAN configure
mode
switch# vlan database
Vlanmode
[portbase| 802.1q |
gvrp]
V To set switch VLAN
mode.
switch(vlan)# vlanmode portbase
or
switch(vlan)# vlanmode 802.1q
or
switch(vlan)# vlanmode gvrp