Comnet CWGE2FE8MSPOE, Installation And Operation Manual

Page: 51 / 143

44
TFTP Commands Set
Netstar Commands Level Description Defaults Example
backup
flash:backup_cfg
G Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)# upgrade
flash:upgrade_fw
PoE Commands Set
Netstar Commands Level Description Example
poe
P Enter POE configure
mode
switch# poe
system
knockoff-disabled
[Enable|Disable]
P Set PoE system Port
Knockoff Disabled
switch(poe)# system
knockoff-disabled disable
system ac-disconnect
[Enable|Disable]
P Set PoE system AC
Disconnect
switch(poe)# system
ac-disconnect disable