ComNav P4 Remotes Series, Installation & Operation Manual

Page: 21 / 40

ComNav P4 Remotes Installation & Operation Operation
Document PN 29010102 V1r1
- 19 -
User Interface
P4 Autopilot Remotes have 4 buttons and a tiller or Joystick as the user input interface. The table
below shows their functions in under different operation mode.
Button Button Action Operation mode Condition Function Result
CMD Short Press Normal operation
modes REMOTE as a
repeater Request to P4 SPU
for taking command
Double click Start up mode and
Normal operation
modes REMOTE as a
repeater Initiate the
configuration menu
Click Configuration menu Root menu Select current item for
editing
Click Configuration menu Editing a menu item Save the item value
and go back to the
menu list
Click Mode selection menu REMOTE is in
command Immediately request
a mode change
without waiting for
time out
MODE Short press Normal operation
modes REMOTE is in
command Initiate Mode
selection menu
Click Mode selection menu REMOTE is in
command Move to the next
available mode
Click Configuration menu Root menu Move to the previous
menu line
Click Configuration menu Editing a menu item Increase the item
value
STBY Short press Normal operation
modes REMOTE is in
command Request to P4 SPU
for switching to
Standby mode
Click Configuration menu Root menu Cancel / close the
menu
Click Configuration menu Editing a menu item Cancel editing and go
back to the menu root
Click Mode selection menu REMOTE is in
command Cancel the selected
mode (cancel the
timer) and stay in the
current mode
Lite (*) Click Normal operation
modes No menu operation Increase the LCD
brightness 1 step.
After maximum
brightness, it returns
to the lowest.
Long press Normal operation
modes No menu operation Toggle between day
and night mode
Click Configuration menu Root menu Move to the next
menu line
Click Configuration menu Editing a menu item Decrease the value of
the menu item
Note: Required that the
Config Menu can ONLY be opened in repeater / remote state.