The Community Loft
34
3
Remove the top connector rings from
one panel. Lift it out of the bottom rings
and hand it down to your friend. Do
not take all the top rings off at once; this
could cause instability and falling pan-
els. Working together, continue around
removing one panel at a time.
2
To remove circular plug between plat-
forms, insert a flat screwdriver from
below to pry up the plug. Then remove
any half-circle plugs.
This picture shows platforms removed
for clarity. Remove platforms only after
plug has been removed.
1
Start at the top of the loft and work
downward. Unlock the childproof
caps on the posts by putting a flathead
screwdriver all the way into any hole on
the cap. Use the screwdriver, pointed
slightly up, as a handle to crank coun-
terclockwise. You will hear a clicking
sound as it turns.
TAKING APART YOUR LOFT
Before taking apart your loft, read all of the in-
structions, and get a friend to help. If you plan
to store your loft, remember it is made of wood,
and needs to be stored in a dry place.
Ta
kin
g a
pa
rt y
our l
oft
