Model 2 Starter
7
3
Stand two long posts and slide a short
panel into the connector rings.
6
To add the next panel, lift one of the connec-
tor rings and use it to secure the new panel.
Assemble your loft by following the pat-
tern you have chosen (see pages 12–13). Go
slowly; it is not easy to replace a panel after a
layer is placed on top.
5
Check the joints. Every panel should be
locked in place by four connector rings.
Repeat this step for each panel as you
build your loft.
4
Secure the panel by sliding another con-
nector ring flat side up onto each post.
