background image

 Railing must be less than 3½" away from the 

wall of your room, or more than 9". Anything 

in between is an entrapment hazard.

 Test the joints for stability before allowing 

children to play on the structure.

 Do not provide anything on the top level of 

your loft which children can use to climb 

over the sides.

 Changing a lower level panel or splicing an 

addition to a standing loft is not recommend-

ed as it is not possible to keep the structure 

stable while lifting weight-bearing rings.

 Each platform should be held down on at 

least two sides by panels and/or plugs to pre-

vent the possibility of a child pushing up the 

floor from below.

 Each platform section, whether 2' x 2' or 

2' x 4', will bear a load of 750 lbs., or the 

equivalent of one teacher and fourteen aver-

age five-year-olds.

 

CAUTION

 This product is intended for indoor 

use only.

 Build the loft right where you want it.  Do not 

reposition assembled lofts by dragging.

 This Product Guide contains important infor-

mation. Please save for future reference. You 

may want to move your loft or change your 

loft configuration later on.

 This product is intended for use by children 

of immature judgment; therefore supervision 

is required at all times.

 This Model 2 loft is appropriate for children 

3–7 years old.

 Children should not be in the room during 

setup.

 This loft requires a minimum class room ceil-

ing height of eight feet (96"). The gap between 

the ceiling and the top railing must be at least 

9".

 If your room has a sprinkler system for fire 

protection, you should have your loft place-

ment checked by a local fire inspector.

 Your loft should be placed where hanging 

ceilings, ceiling fixtures, windows, or sky-

lights are not accessible to children.

 Do not attempt to build or take apart your 

loft by yourself. You need at least two adults 

working together to do this safely.

 Use the patterns supplied in this Product 

Guide. We cannot take responsibility for free-

form structures.

community playthings

®

for your safety…

WARNINGS

Failure to follow these warnings and the assembly 

instructions could result in serious injury or death.

Summary of Contents for L310 Starter 2





































Reviews: