3
4-way, 7-way and 12 way cable
2.1.4
4-way, 7-way cable and 12W cable used in
Application 3, drop port.
26-way cable
2.1.5
For 26W cable used in Application 1.
2.1.6
For 26W cable used in Application 3, divide
micro ducts into 4 sections (shown in 2.1.6) and
cut into the length.
2.1.7
2.2 Leave the 12mm centre micro duct at maximum
70mm for 26W cable in Application 3.
3
Closure installation
3.1 Push the clip and then use the screw driver to open
the closure
3.2 1W cable installation.
3.2.1
Install the 3pcs 1W cables (or dummy rods) onto
the 6-port gel block underside.
3.2.1.1 For 9.0mm tube as below:
Note:
Make sure the outer jacket contacts gel port end
surface as shown.
3.2.1.2 For 7.2mm tube as blow
Note:
Make sure the outer jacket exceed gel port end
surface as shown.
①
②
90mm
140mm
50mm
Lmax=70mm
150mm
50mm
320mm
220mm
50mm
110mm
Micro Duct
L=140mm
Micro Duct
L=90mm
Micro Duct
L=140mm
Micro Duct
L=90mm
