ADCP-92-098 • Rev C • May 2018
Page 5
© 2018
CommScope
. All Rights Reserved.
The 1U termination and splice panel has one splice tray. The 2U termination and splice panel
has two splice trays.
Figure 3
shows the external features of a 2U panel.
Figure 3. FPX 2U Panel External Features
2
INSTALLATION
Installation of a FPX panel involves the following tasks:
1. Selecting the mounting brackets (covered in
Section 2.1 on Page 6
);
2. Installing the panel on the rack (covered in
Section 2.2 on Page 7
);
3. (Optional) Installing vertical cable guides (covered in
Section 2.3 on Page 8
);
4. (Optional) Installing adapter packs (covered in
Section 2.6 on Page 12
);
5. (Optional) Installing MPO cassettes (covered in
Section 2.7 on Page 13
);
6. Termination Only Installation (covered in
Section 2.8 on Page 14
)
7. Installing a cable clamp (covered in
Section 3 on Page 15
);
8. Routing cables and pigtails (covered in
Section 4 on Page 17
).
REMOVABLE REAR
COVER PROVIDES
EASY ACCESS FOR
CABLE ROUTING
AND MANAGEMENT
RADIUS LIMITERS FOR
CABLE MANAGEMENT (8)
HINGED
FRONT
COVER
DESIGNATION
LABEL (2)
COVER
LATCH
BULKHEAD
ACCOMMODATES
ADAPTER PACKS OR
MPO CASSETTES
OSP CABLE ENTRY
(EITHER SIDE)
MOUNTING
BRACKET (2)
24621-A
SPLICE
TRAY LOCATION
CABLE CLIP
(2 PER SIDE)
SLIDING
TRAY
TRAY RETAINING
CLIPS (2 PER SIDE)