ADCP-92-098 • Rev C • May 2018
Page 25
© 2018
CommScope
. All Rights Reserved.
4.2.4
Routing OSP Cable, Right Side Entry (MPO cassettes)
For right side cable entry in a panel with MPO cassettes, route the OSP cable from the cable
clamp position to the MPO cassettes as shown in
Figure 25
. “Right” is defined from the front of
the panel.
Figure 25. Routing OSP Cable, Right Side Entry (Adapter Packs)
CONVOLUTED
TUBING
(PROVIDED)
OSP CABLE
- DRAWER IN CLOSED POSITION
- TOP COVER NOT SHOWN, FOR CLARITY
- REAR COVER REMOVED
NOTE:
23956-A
CABLES SHOULD BE LONG
ENOUGH TO COMPLETELY
PULL OUT THE SLIDING TRAY
NOTE:
REMOVE THIS
RADIUS LIMITER
FOR RIGHT SIDE
ENTRY