9
5.21 Route the fibers inside the tray and behind the SMOUV holder
to the storage area. Repeat steps 5.18 en 5.19 to go to the storage
area.
5.22 Both sides.
5.23 Install the splicing tray cover.
6.1.1 Remove 15 mm (0.6”) extra of the outer jacket as shown on the
picture and leave the shield. Install the cable attachment bracket on the
outer jacket. Place the braid (double layer) on top of the shield. Use the
standard steel cable clamp to fix everything on the cable.
6.1.2 Install the continuity braid in the closure as shown on the picture
at the backside of the closure.
6 Shield continuity or grounding
6.1
Loose tube and central core cable
6.1.3 Install the tray back in place.
