5
5.3
Install the splice protectors in the splice holder and route the
fibers underneath the splice holders and around the tabs (1) in the tray,
first one side and then the other side.
5.4
Splicing cable 1 to 3.
5.5
Route first the incoming fiber from both sides into the groove
behind the splice holder.
5.6
Install the splice protectors in the splice holder (2) and route the
fiber underneath the splice holders and around the tabs (1) in the tray,
fibers at one side of the splice protector you have to make an S to store
them as shown on the picture (3).
5.7
Install the splicing tray cover.
2
3
1
