2
Depending on the network layout and the construction of the cables, the
kit content may be different.
Some of the components will be pre-assembled in the closure
depending on the selection and the ordering.
The minimum content will be: the joint body & cover with
• Pre installed - 1 splicing tray (24/48)
- 1 splicing tray cover
- 2 step splice holders
- 2/4 splice holders
- 2 longitudinal rubber seals
- 2 external cable strain relieves
- 1 re-entry label
• 2 Cable attachment brackets (different type depending on the
cable type)
• 2 Stainless steel cable clamps
• 2 Cable plugs
• 1 Cleaning tissue
• 1 Installation instruction
Optional a shield continuity or grounding wire with eyelets.
2.2
Kit contents
3.1.1 Prepare the cable according to the drawing, remove the outer
cable jacket over a length of 1000/1300 mm (40”/50”) and cut the
strength member at 25 mm (1.0”) length.
3 Cable preparation
Cable diameter: minimum 5 mm (0.20”), maximum 15 mm (0.60”).
3.1
Loose tube cable preparation
3.1.2 Remove the loose tubes up to 35/60 mm (1.5”/2.5”) from the
cable cut.
A maximum of 4 loose tubes can be terminated.
Remark
: for the 48 splice tray is at the hinge side maximum of 4 loose
tubes possible, on the front side only 2 loose tubes.
Splice capacity
24
48
A
25 (1.0”)
25 (1.0”)
B
35 (1.5”)
60 (2.5”)
C
1000 (40”) 1300 (50”)
A
B
C
