6
3.3.10 In case of SE trays (single element trays), start at the second
position and leave 1 space between all the other trays.
3.3.8 In case of a pure cable-cable configuration: no KTU-brackets
are placed, the groove plates are not modified, tubes enter at both
sides of the FAS block.
3.3.9 Click the trays on the groove plates starting from the fasblock.
Preferably mount the trays as you fibre up.
In case of SC trays (single circuit trays); don’t leave any gaps.
4.1.3 For back and GR mounting: mount the flex tube holder in the
third hole from the front.
4.1.2 Mounting position: position the toothed lock washer (1)
between the tube holder and the side plate.
3.3.11 If necessary, trays can be removed using the fiber guiding pin.
4 Cable termination
4.1
Cable termination in the rack
Cable is already terminated in the rack (or in the side duct of the rack)
on the cable termination plate. For the loose tube cable, the tubes are
protected from the cable termination plate with the flex tube. For central
core cable, fibers are guided into guiding tubes going directly into the
shelf.
a)
Loose tube cable
4.1.1 Take the tubes out of the unit. To avoid kinking of the tubes
make sure the drawer is closed. To assure correct bend radius: do not
reposition the fixed tie wrap.
b) Cable to cable
c) Mounting the trays
1
