Comms365 C365-4G-H685 User Manual Download

Page: 3 / 60

C365-4G-H685 User Manual CB-V1 (March 2020)

www.comms365.com | 01234 865880 | [email protected]

3.5 Services configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.5.1 ICMP check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

3.5.2 VRRP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 23

3.5.3 Failover (link backup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.5.4 DTU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25

3.5.5 SNMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26

3.5.6 GPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.5.7 SMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 29

3.5.8 VPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.5.8.1 IPSEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

3.5.8.2 PPTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32

3.5.8.3 L2TP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 34

3.5.8.4 OpenVPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35

3.5.8.5 GRE tunnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.5.9 DDNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36, 37, 38

3.5.10 Connect Radio Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.6 Network Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.6.1 Operation Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.6.1.1 Gets two LAN Ethernet Port for H685. . . . . . . . . . . 39

3.6.2 Mobile configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41

3.6.3 Cell mobile data limitation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

3.6.4 LAN settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42, 43, 44

3.6.5 Wired-WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

3.6.6 Wi-Fi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

3.6.6.1 Wi-Fi General configuration. . . . . . . . . . . . . . . . . . . .45

3.6.6.2 Wi-Fi Advanced configuration. . . . . . . . . . . . . . . . 46

3.6.6.3 Wi-Fi Interface configuration. . . . . . . . . . . . . . . . . 46, 48

3.6.6.4 Wi-Fi AP Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48, 49

3.6.7 Interfaces Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Summary of Contents for C365-4G-H685





























































Search results

Summary of Contents for C365-4G-H685

Reviews:

Related manuals for C365-4G-H685

Brands by name

Popular brands

Comms365 C365-4G-H685, User Manual

Search results

Summary of Contents for C365-4G-H685

Reviews:

Related manuals for C365-4G-H685

Brands by name

Popular brands