Comms365 C365-4G-H685 User Manual Download

Page: 55 / 60

C365-4G-H685 User Manual CB-V1 (March 2020)

www.comms365.com | 01234 865880 | [email protected]

3.6.9 Static Routes

•

Interface:

You can choose the corresponding interface type.

•

Target:

The destination host IP or network.

•

Gateway:

The IP address of the next router.

Notice:

– The gateway and LAN IP of this router must belong to the same network segment.

- If the destination IP address is the same as the host, the Netmask must be 255.255.255.255.

– If the destination IP address is an IP network segment, it must match the Netmask. For example, if
the destination IP is 10.0.0.0, and the Netmask is 255.0.0.0.

3.6.10 Switch

Notes:

1. Port 4 is A Wired-WAN port, port 0, port 1, port 2, port 3 are LAN ports.

2. “Untagged” means the Ethernet frame transmits from this port without a VLAN tag.

3. “Tagged” means the Ethernet frame transmits from this port with a VLAN tag.

4. “Off” means that this port does not belong to VLAN. For the default setting, port 0 belongs to VLAN1,
but not to VLAN 2.

Summary of Contents for C365-4G-H685





























































Search results

Summary of Contents for C365-4G-H685

Reviews:

Related manuals for C365-4G-H685

Brands by name

Popular brands

Comms365 C365-4G-H685, User Manual

Search results

Summary of Contents for C365-4G-H685

Reviews:

Related manuals for C365-4G-H685

Brands by name

Popular brands