9
C365-4G-H685 User Manual CB-V1 (March 2020)
www.comms365.com | 01234 865880 | [email protected]
2.8 LED and Check Network Status
Please connect the antenna after you successfully connect the cable. Insert the valid SIM/UIM card
and provide the power to the router via the cable. When the power is turned on the SYS LED starts to
blink after a few seconds, this means that the system start-up has been started; if the CELL LED lights
up, this means that the network is online; if the VPN light works, this means that the VPN tunnel has
been set up. Please refer to the below table as a guide for the indication lights.
SYS
On for 25 seconds
On for 25 seconds after power supply
Blink
System set-up normally
Off or still on after 25
seconds
System set-up failure
LAN
Blink
Data transmission in Ethernet
Off
Ethernet connection abnormal
On
Ethernet is connected
VPN
On
VPN tunnel set-up
Off
VPN tunnel set-up failure or unactuated
CELL
On
Access to the Internet
WIFI
On
Enable
Off
Disable
WAN
Blink
Data transmission in Ethernet
Off
Ethernet connection abnormal
On
Ethernet is connected
SIGNAL
Off
No signal, or signal checking is not ready
4s blink 1 time
Signal bar is 1
3s blink 1 time
Signal bar is 2
2s blink 1 time
Signal bar is 3
1s blink 1 time
Signal bar is 4
1s blink 2 times
Signal bar is 5
