! C0% Tracks the current position in the ring buffer LC$() for
the last 16 commands
! CA Total number of system calls
! CB Number of public messages posted by the user before his
current call
! CC Tracks charges for individual system functions, before
later being rounded to the penny and added to Z6%
! CC% Flag for u/d, Email, and subboard systems, if cc%=0 no
charges were made, if non-zero, directory and pointers
files must be re- saved before exiting
! CC%(14,14) The accounting system variables, 1st index is the access
group, 2nd is the item (see a command from the Main
Menu).
! CD Number of blocks that the user has downloaded before his
current call
! CH% Number of times that chat has been requested. When ch%
gets to be 5, the user is logged off the system. When
chat mode is enabled, ch% is reset.
* CM$ Set to the current subsystem’s name, such as “E-Mail”,
“Sub 1”, or “Pfiles”.
! CN Number of calls since the system was set-up
! CO% Current user’s computer type
! CP$(10) List of computer types (see prg.setup for definition)
! CR P-Files/G-Files, the current rate charged per minute
- CR%(251) If the editor is used, these are flags telling whether or
not RETURN was pressed on each line. 1=Yes, 0=No.
! CS Tracks the time at which a user entered the P-Files area,
to do accounting calculations later.
! CT% Number of calls the user has made today
! CU Number of blocks that the user has uploaded before his
current call
! CV Number of private messages that the user has written
before his current call
! D Temp use
* D%(41) Temp use
! D$ Temp use
! DO In subboards, current subboard # + 6
- D1% Used to represent a device number. In maintenance and
term, the current work device.
! D1$ The current date and time, the string is 11 ASCII
characters in length, in the form WYYMMDDHHMM, where W
is the day of the week (1-7), 1=Sunday, YY is the year,
MM the month, DD the date, HH the hour (80 is added if
the hour is PM), and mm is the minutes, MCI variable 0.
- D2% Used to represent a drive number. In maintenance, the
current work drive.
! D2$ MCI V8, sub-board name for entry files.
! D3$ MCI V9, last caller for sys.welcome
* DC When entering subs/uds/files, tracks the number of paths
requested (like B4;6;7 has 3 paths).
* DC% The counter, counts up to DC.
! DF Number of files user has downloaded.
! DN Number of blocks user has downloaded, including his
current call. (Number of blocks this call is obtained
by dn-cd).
! DP% Default protocol user has selected (see tp$() list)
! DS Disk drive error number.