4906 300BAUD Set baud rate 300.
4909 1200BAUD Set baud rate 1200.
4912 2400BAUD Set baud rate 2400.
4916 Startup Used to load ‘prg.ram’ at
program start.
4919 Flush Remove all added variables
since 3590.
4922 L80 RAM expander, load SEQ to bank 1.
4925 L81 RAM expander, reset this to bank 0.
4928 Putc0 Move what’s at c0 real memory
to d0.
4931 Putd0 Move what’s at d0 real memory
to c0.
4936 Screenbeep Flash the screen. Those of you who don’t like this, maybe
inserting an RTS ($60) at the
appropriate place here will appease!
(Then re-save the file).
4939 SwiftInit Initialize Swiftlink and Wedge NMI Handler.
-- ml --
7171 Output Print a$ to screen.
7174 ResetMCI Return all MCI things back to
default (in most cases off).
7177 Put1 Output the single character ASCII
found at location 254.
7180 DoSecs
7183 Onechar Wait for 1 character to be pressed,
don’t print anything to the
screen, used with gosub2200.
7186 Input Wait for a line to be entered.
Used with line 2100 routine.
inputs: at 7276, the # of chars to
enter.
returns: Note that the ‘output’ is
placed on an internal ‘stack’
and to retrieve it, INPUT#6,
(ar) must be used.
7189 Password Wait for a password to be entered
(mask the output to hide the
password).
7192 Dotm1
7195 Chatmode Enter chat mode (line 7000).
7198 Cmpdates Compare the LD$ ML variable to
what’s in a$, see line 10000.
7201 Diskina Read a line from the open file #2,
returns: stack variable.
7204 Readfilec Read the open file #5 from disk, or
from RAMEX, clear screen
first, see gosub15000.
7207 Readfile Same as above, but don’t clear
screen.
7210 Getdate Convert 11 digit date to verbose
form
input:an$=date like 18912030110
output: stack var like 3-Dec-
1989 1:10a
7213 Figline2