7531 Internal flag, print TAB spaces.
7533 Wordwrap flag, return immediately from line input?
7543 The current 6 digit date (in BCD), so 01 12 03 89 12 42 is
Sun 3- Dec-1989, 12:42 a.m.
7555 Terminal buffer, flag =1=open.
7558 Current date in 11 digit format
7596 Flag, user has sysop access (for the MCI Test during file
reads..)
7604 Flag, linefeeds 1=Yes.
7608 Flag, ANSI mode 1=Yes.
7612 Flag, file abortion has been disabled (using /al).
7616 Default RGB coding for the default color.
7620 Default color (0 to 15)
7632 Password mask ($2e normally “.”) ... here it is! Poke
this with an ASCII character value to change the
password mask character!!
7687 Scrtbl, 256 bytes for screen output translation.
7943 Tratbl, 256 bytes for Commodore to ASCII translation.
8199 Rectbl, 128 bytes for ASCII to Commodore translation.
8410,1 Upload block counter (signed, $ff=-1), and flag for
change, after you do ‘on-line credits changing’.
14339 For editor, number of lines maximum.
14340 For editor, number of lines maximum-1.
14341 For editor, right column.
14342 For editor, access flags (Sysop, MCI, etc.).
14343 For editor, device for reading sys.menu 3.
14345,6 For editor, pointer to base of TT$(1) array.
14347 For editor, number of lines coming out, going in.
56328,31 System clock, may be read to figure time for downloads,
etc.
56577 Data port (RS-232) for testing carrier, DTR hang-ups.
56579 Data Port (RS-232), set which bits input/output.
62720 Start location of the ‘subs.o’ and ‘uds.o’ files, used to
see if one’s already loaded.
21.4 BASIC SYS COMMANDS
This chapter details each of the BASIC SYS commands found throughout C-NET.
For example, SYS4894 will cause the Chat Whistle to ring. Headers are
also provided to show the files in which the various routines are located.
Where appropriate, the input and output of the routines area is also noted.
SYS # DESCRIPTION FUNCTION
0 The BASIC variable “0” should be
permanently set at the value 7171,
to
output the contents of the variable
a$
to the screen and modem (GOSUB40
also).
NOTES: input: lp=1 ... Carriage Return after output.
mw=1 .. Allow abort anywhere in input.
output: rc=1 ... SPACEBAR was pressed.
sh=47 .. / key was pressed.
-- m4.0 --
1024 Savescreen Go to 24 line screen