User Manual
COMM-TEC
UP-1080p
COMM-TEC GMBH
2 of 21
Caution:
Safety Cautions:
In order to keep the normal function of the equipment and the user’s safety, the
following instructions should be followed during the installation, operation and
maintenance:
1. The equipment should be well grounded during the installation, and no two-pin plug
should be used for power supply. The power supply should be AC and within the range
of 100V – 240 VAC, 50/60 Hz.
2. Please do not place the equipment in over-heat or over-cold places.
3. Please keep the equipment in good ventilation, so that the heat can be emitted on time
to avoid being overheated.
4. The general power supply should be switched off if the equipment are in humid
environment with condensation or are not in use in extended periods.
5. The power supply plug must be unplugged from the socket under the following
conditions:
a: Remove or reinstall any components of the equipment
b: Cut off or re-connect the power supply or other circuit
6. There is high voltage component inside the equipment, please do not dismantle the
equipment without professional knowledge to avoid electric shock and further damage
to the equipment.
7. Please keep eroding chemicals and fluid far away from the equipment.
This manual mainly introduces the functions, dimensions, accessories, technical
parameters and some common FAQ etc.
This manual only provides an instruction for user’s operation, and should not be used
as the reference for after service. The mentioned functions inside the manual are in
consistence with the hardware version till April 2010. Future changes will be
supplemented accordingly.
All rights regarding this manual are reserved by COMM-TEC. Without paper
authorization from COMM-TEC, no organization or individual can use all or part of the
content for commercial purposes.
