User Manual
COMM-TEC
UP-1080p
COMM-TEC GMBH
20 of 21
12 Technical specifications
Video Inputs
Connector: Cinch
2 x Composite
Video standard: PAL, SECAM, NTSC 3.58, NTSC 4.43
Connector: 4pin MiniDIN
2 x S-Video
Video standard: PAL, SECAM, NTSC 3.58, NTSC 4.43
Connector: 3 x Cinch
Type: (YPbPr/YCbCr)
2 x Component
Resolution: up to 1080i
Connector: D-Sub HD 15 pin (female)
Sync input: Separate, Composite, Sync-on-green
Resolution: up to 1600x1200
Horizontal scan range: 30 - 81 kHz
Vertical scan range: 56 – 75 Hz
2 x VGA
Bandwidth: 170 MHz
Connector: HDMI-A
Support protocol: HDMI 1.3a, DVI 1.0, HDCP 1.3, x. v. Color, True HD, DTS-HD
Pixel bandwidth: 165 MHz
Bandwidth:2.25 Gbps
Resolution: up to 1600x1200@60_24bit Color depth / HDTV
1920x1080p@60_24bit Color depth
Input EDID: Use the system default EDID, EDID support for the terminal is mapped
to the input
Maximum input cable lenght: Less than 25 meter, 1920x1080p @ 60Hz
4 x HDMI
Recommend to use a HDMI certified cable
Audio Input
Connector: 4 x Phoenix 10pin connector balanced audio input
Bandwidth: 20 Hz ~ 20 kHz
Impedance: Input: >10 k
Ω
(Balance/ Unbalanced)
Max input level:+19.5 dBu, (Balance/ Unbalance)
8 x Audio Stereo
Input mapped by default to the analog video inputs
Connector :6,3 mm jack
MIC Type: Dynamic Sensor
Input Sensitivity: 25 mV
1 x Microphone
Bandwidth: 50 Hz ~ 16 KHz
Video Output
Connector: D-Sub HD 15 pin (female)
1 x VGA
Signal type: RGBHV
Connector: HDMI-A
Resolution:
800×600
@60Hz,
1024×768@60Hz,
1280×720@60Hz,
1280×800@60Hz,
1280×1024@60Hz,
1366×768@60Hz,
1440×900@60Hz,
1440×1050@60Hz, 1600×900@60Hz, 1600×1200@60Hz, 1680×1050@60Hz,
1920×1080@60Hz
Audio: Audio output on HDMI can be switched off
Maximum output cable length: Less than 10 meter, 1920x1080p @ 60Hz
1 x HDMI
Recommend to use a HDMI certified cable
Audio Output
1 x digital Audio
On HDMI output, Audio can be switched off
Connector:2 x RCA
Impedance: 50
Ω
1 x analog Audio
Max output level:+19.5dBu
