User Manual
COMM-TEC
UP-1080p
COMM-TEC GMBH
6 of 21
•
Y/C Signal switch button, used to select Y/C signal input. Long-press for 1 second to enter the
adjusting mode of brightness, contrast, saturation, sharpness and color. For the detailed
operation, please refer to Chapter 8 “Y/C Settings”
•
VGA Signal switch button, used to select VGA signal input. Long-press for 1 second to enter the
adjusting mode of brightness, contrast, saturation, sharpness and color. For the detailed
operation, please refer to Chapter 9 “VGA Settings
•
HDMI Signal switch button, used to select DVI/HDMI signal input. Long-press for 1 second to
enter the adjusting mode of brightness, contrast, saturation, sharpness and color. For the detailed
operation, please refer to Chapter 10 “HDMI Settings”
n
Signal Source Switch Button
Used to select the corresponding input channel of the signal sources (e.g. 1, 2, 3, 4). Please select
the signal source before switching. When choosing DVI/HDMI signal input, short-press the signal
source switch button (e.g. 1, 2, 3, 4) to choose HDMI signal source input channel; long- press the
signal source switch button (e.g. 1, 2, 3, 4) to choose HDMI (DIV) video Y/C audio
signal/VGA audio signal as the corresponding input channel.( E.g. long-press 1/2 button to choose
HDMI (DVI) channel 1/2 video Y/C channel 1/2 audio signal as the input signal channels;
long-press 3/4 button to choose HDMI(DVI) channel 3/4 video VGA channel 1/2 audio signal
as the input channels)
o
Display resolution Selection Button
Press the button to enter the resolution setting mode. After entered the resolution setting mode, each
press will change a resolution. The LCD displays the current operation information and changes to
the selected resolution after 1 second after the press. Under the adjusting mode of brightness,
contrast, saturation, sharpness and color, this button can also be used to confirm operation (Enter
button).
p
MIC Volume adjust button
During the adjustment, there are volume indicating bar on the LCD. The initial value is set to be
medium every time the machine is turned on.
Press VOL-
：
turn down the volume
Press VOL+
：
turn up the volume
q
Mute button and main volume adjust button
Mute button works on MIC and the main volume at the same time
Main volume button
Press VOL-
：
turn down the volume
Press VOL+
：
turn up the volume
r
Signal Source Indicator
There are indicator respectively for CV signal, COMP signal, Y/C signal, VGA signal and HDMI
signal. When there is signal passes by, the corresponding indicator will be lighten up.
