7 of 38
3.
Getting started
n
Power On
l
Insert the CF memory card that has Picture, Music, Movie or WMV9 files.
l
Press the “POWER” button to power on the ProPLAY HD, then press the “TV
MODE” button to select the output mode.
n
Status After Power On
l
Status 1:
If the “AUTOPLAY (Movie or Picture)” function is enabled and there are
movie or picture files in the CF card, the ProPLAY HD will auto play movie or
picture files on the CF card after power on.
l
Status 2:
If the “AUTOPLAY” function is disabled, after power on the main
menu will appear as shown in the following figure. There are two groups in the
main menu (“/mnt/CF” and “SETUP”).
NOTE:
The pop-up window that shows the IP address will appear later, if DHCP mode is
selected when the ProPLAY HD is turned on.
n
Power Off:
Press the “POWER” button again to power off.
