IE-SNC-Tx6xx-07
9
•
click to
Change IP
to set new address according to network administrator
instructions. If your device is not listed, then click
Help! My
device wasn’
t
found!
Then follow the instructions. MAC address is on product label.
The device is factory set to IP
192.168.1.213
.
•
gateway may not be entered if you want to use the device only in local network.
If you set the same IP address which is already used, the device will not work
properly and there will be collisions on the network. If the device detects
a collision of the IP address then reboot is performed automatically.
•
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes about 10 seconds.
•
connect to device using TSensor software and check the measured values. Set
the other parameters (alarm limits, SMTP server, etc.). Settings are saved after
click on button
Save changes
.
Checking functions
The last step is to check measured values on the device website. In the address bar of the
web browser, enter the device IP address. If the default IP address was not changed, then
insert
http://192.168.1.213
.
Displayed web page lists actual measured values. If the web pages are disabled, you can see
text
Access denied
. In the case of measurement error a text
Error
is shown instead value.
