IE-SNC-Tx6xx-07
15
Mode of CO
2
concentration measuring can be set by item
Average CO
2
measuring mode
–
„SLOW mode“. Because principle of CO
2
concentration measurement depends on
atmospheric pressure (altitude), it is recommended for accurate CO
2
measurement set
Altitude for CO
2
compensation
.
Whole measuring range of CO
2
concentration (0 to 2000/10000ppm) can be divided into
three areas. Using three-color LED the transmitter indicates, in which of these areas the
measured value is. LED configuration is possible via fields
Yellow LED limit
and
Red
LED limit
.
SOAP protocol
SOAP protocol can be enabled by option
SOAP protocol enabled
. Destination SOAP
server can be set via
SOAP server address
. For setup of server port can be used option
SOAP server port
. Device sends SOAP message according selected
Sending interval
.
Option
Send SOAP message
when alarm occurs
sends message when an alarm on
channel occurs or alarm is cleared. These SOAP messages are sent asynchronously to
selected interval.
