IE-LOG-S5141-01
3
Total memory capacity:
for non-cyclic mode
8 126 records for each measured channel
for cyclic mode
7 880 records for each measured channel
Specified values are maximum possible (when all channels are switched on) and can be
reached only if record is not interrupted (since last memory erasing)
Communication with computer: via RS232 (serial port) by means of COM adapter or USB
port by means of USB adapter; data transfer from logger via communication adapter is
optical
Real time clock: adjustable from computer, integrated calendar including leap years
Error of internal RTC: < 200 ppm (i.e. 0.02 %, 17.28 s in 24 h)
Power: Lithium battery 3.6 V size AA
Typical battery life:
typical (data download to PC is carried out about once a week): 5 years
in continuous on-line mode with interval 1 minute: approximately 3 years
in continuous on-line mode with interval 10 seconds: approximately 1 year
Notice: The above battery lives are valid for logger operation in temperature from -5 to
+35°C. If often operated outside of the above temperature range battery life can be reduced
to 75%.
Protection: IP20
Operational conditions:
Operational temperature range: -30 to +70 °C
Operational humidity range: 5% to 85 %RH
Specification of outer characteristics accordingly to Czech National Standard 33-2000-3:
normal environment accordingly to appendix NM: AE1, AN1, AR1, BE1
Operational position: negligible
Logger installation: by self adhesive Dual Lock, applied to clean, flat surface
Not allowed manipulation: incoherent surface is unsuitable for installation of the logger
using the self adhesive Dual Lock
Limit condition: temperature -40 to +70 °C, humidity 5 to 85 %RH
maximum voltage at measuring input (IN1, IN2 and IN3) -1 to +7V dc
Storing condition: temperature -40 to +85 °C, humidity 5 to 90 %RH
Dimensions: 93 x 64 x 29 mm
Weight including battery: approximately 130 g
Material of the case: ABS
Logger operation
Logger comes complete with installed battery and switched OFF. Before operation it is necessary
by means of installed user PC software to set logging parameters and other features. The PC program
is common for all types of loggers Sxxxx –
for type S5141 it is necessary to have installed version
4.0.17.0
or higher. Older program version can cause logger reconfiguration together with loss of
proper function! Installed program version can be verified in menu Help
/ About program…
Free
newest program version is available to download at
www.cometsystem.com
. For communication with
the PC a communication adapter is necessary (not included in delivery). For connection via RS232
serial port it is necessary to use COM ADAPTER, for connection via USB port it is necessary to use
USB ADAPTER. Connect adapter connector to proper computer port and plug the adapter to the
guide slots on the side of logger.
