COMESTERO GROUP
M21/03.02
Rev.02
of 25/09/03
Page 10 of 34
5
5
.
.
L
L
A
A
B
B
E
E
L
L
In order to facilitate the validation of the equipment, i.e. of the configuration (operating mode) and
of the adjustment ( type of coins accepted), below is the graphic representation of the labels on the
front or the back of the coin validator subdivided into models:
RM5 EVOLUTION
The label identifies:
-
The serial number of the equipment
-
The type (V,G,F)
-
The configuration
-
The adjustment
-
The value of the coins and the channels adjusted
-
The exit of the coin
-
The power supply
Take as example the label here below:
As you can see the label consists of 10 squares per line (VALUE) preceded by ten rectangles
(OUT).
Inside the squares the “value of the coin adjusted” is entered; to identify the channel it is sufficient
to read the “Value identifying the first channel of the line” and count the number of squares. For
example, the second value on the third line identifies the 22
nd
channel.
The rectangle “OUT” represents the output channel.
Fig. 6
value identifying the first channel of the line – Value of the coin adjusted on channel 2 – No. identifying the
coin output- Type and configuration of the equipment – Power supply – Bar code identifying the serial
number of the equipment