COMESTERO GROUP
M21/03.02
Rev.02
of 25/09/03
Page 13 of 34
7.1
SELF-PROG FUNCTION
(FUNCTION DISABLED FOR : RM5 X CC, RM5 X AT, RM5 X E0)
The SELF-PROG function is extremely useful in case of programmation of a coin or a token
directly on the machine where they are installed as the first six channels of the RM5 validator can
be reprogrammed wihout requiring any external equipment. To be noted that , in addition to the
programmation of the coin/token on the specific channel, other parameters of the validator may be
modified, such as for example the value attribution; in this case it is absolutely necessary to use
either the Portable Programmer or the PC Kit.
Programming a token or a coin on channel No. 6
•
With machine off, put the 6 DIP-SWITCHES to “ON”
•
Energize and insert 15 coins/tokens
•
Wait for the double “clack” of programming end
•
Put DIP switches to OFF
•
Switch off the validator and switch it on again
Programming tokens and/or coins on channels 1 to 5
•
With machine off, put the 6 DIP-SWITCHES to “ON”
•
Energize and insert 1 or 2 coins
•
Leave on ON only the SWITCH corresponding to the channel to be programmed
•
Insert coins until the double “clack” of programming end
•
Put DIP switches to OFF
•
Switch off the validator and switch it on again
NOTE: At the end of the procedure the first two coins introduced may be rejected. With
the operation the new adjustment (coin/token) will keep the previously programmed value.
In X 21 configuration the credit will be equal to the previously set game price.
7
7
.
.
2
2
P
P
O
O
R
R
T
T
A
A
B
B
L
L
E
E
P
P
R
R
O
O
G
G
R
R
A
A
M
M
M
M
E
E
R
R
The major innovation determining the strong point of the equipment, in particular in this period of
major changes, is given by the Portable Programmer: the RM5 PROGRAMMER,which modifies all
functions of the equipment on site and also includes the “CLONING” function.
This fuction allows to take the data from one coin validator or from a PC and to transfer them to
another coin validator which will therefore be identical to the first one: adjustment, configuration
and options incuded.
For the versions RM5 X CC, RM5 X AT, RM5 X E0 it is ONLY POSSIBLE TO READ THE DATA
CONTAINED IN THE EQUIPMENT.
There is also a cheaper “EASY”version, not including some of the functions, such as the
configuration change and duplication.
For these functions and for the performances provided by the two models, please refer to the
manual of the portable programmer.
