69
Setting the call times
Advanced Settings
Lock-release key
OFF key disabled
Call times
Call divert
Set call times
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
0
#
ABC
DEF
MNO
JKL
GHI
WXYZ
TUV
PQRS
Awaiting reply (in)
Expressed as min:sec
Awaiting ans.serv.act.
Conversation
Pause
Awaiting reply (out)
01:00
00:30
01:30
01:30
00:30
Setting call divert
Advanced Settings
Lock-release key
OFF key disabled
Call times
Call divert
Set call times
2002
Setting activations on call
Advanced Settings
OFF key disabled
Call times
Call divert
Activations on call
Advanced Settings
Alarm
Panic
Fire
Call priority 4
Advanced Settings
Active:
Confirm
Address
Builtin
Module
Output
Cancel
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
0
#
ABC
DEF
MNO
JKL
GHI
WXYZ
TUV
PQRS
When this function is active, on receipt of a specifi c type of call the switchboard will activate the output of an actuator module Art. 1443, or of an
extension unit connected to it.
The following example illustrates the function confi guration procedure for an
Alarm
call; the same also applies for the other types available in the menu.
In the
module
fi eld, select whether to activate an output on board the actuator Art. 1443 (Builtin), or specify the number of the expansion device with
which you want to interact. In the
output
fi eld, enter the exact number of the output you want to activate (1 or 2 for module art.1443, or 1 to 10 for an
expansion device).
◊ Awaiting reply (in):
wait time in which a call is ended if it is not answered.
◊ Awaiting ans.serv.act.:
maximum time after which the answering service is activated if a call is not answered.
◊ Conversation:
maximum conversation duration.
◊
Pause:
maximum time a call can be put on hold.
◊ Awaiting reply (out):
wait time in which, if there is no answer, the call is ended.
This function can be used to divert incoming calls to another switchboard on the list.
In the
address
fi eld, enter the VIP address of actuator Art. 1443.
