62
INTERCOM
CAMERAS
PROGRAMMER
USER
Sat 15/06/13 01:21
1. Press PROGRAMMER
to access the INSTALLER MENU.
2. Enter the password.
3. Press
to confirm the password and access the INSTALLER
MENU.
The password for the installer menu is 0000. To change the
password, please refer to the technical manual for VIP Manager
Art. 1449.
• Accessing the installer menu
•
Configuring buttons
1.
Access the
Installer
menu.
2. Access the
Configure
buttons
menu.
The buttons on the Sette Stelle internal unit Art. 6501 can be programmed
with various functions.
The procedure to be used for all buttons is detailed below.
INSTALLER MENU
Configure buttons
Configure monitor
Special Settings
3.
Select the button you wish to configure.
4.
Press
next to the function you want to assign to the button.
Actuator
KEY BUTTON
Lock-release
•
Configuring functions
Press the name of the function to access the corresponding configuration
menu.
◊ Intercom function
This function can be used to send an intercom call to a specific device.
Master
INTERCOM
Configure ViP address
Slave
1
1.
Access the
Configure VIP address
menu to set the address of the
device you want to associate with the intercom function.
2.
Select whether to call the Master or Slave backplate for the set
address. If you select Slave, you will also need to set the exact
number of the slave as desired.
◊ Self-ignition function
This function can be used to view the images transmitted by the camera
for one or more devices connected to the system.
SELF-IGNITION
00002003
C
1.
Press the + icon to add a device to be assigned to the function
Automatic camera
SELF-IGNITION
Configure ViP address
Camera number
1
2. Access the
Configure VIP address
menu to set the address of the
device you want to associate with the self-ignition function.
3.
Select which device camera you wish to use, from
Automatic
(in the
case of external units or camera number one of modules Art. 1445)
or
Camera number
(if you want to use the camera of a device
Art. 1445).
4.
To remove a device from the list, press icon
C
followed by the device.
5.
To edit the settings of a device on the list, press the pencil icon
followed by the device.
7Stelle monitor Art. 6501
