66
◊
Call divert
This menu can be used to set the call divert function.
CALL DIVERT
Configure ViP Address
Activate timed divert
Activate divert when busy
Wait time
10
1.
Access the
Configure VIP address
menu to enter the address of the
device to which the call will be diverted.
2.
Set the wait time before the call is diverted.
3.
Select whether to divert the call after a set period of time, if the line is
busy or in both cases.
◊
Alarms
This menu can be used to set the VIP address of the device which will
be called when a priority call is made. The configuration for Alarm calls
is illustrated below, as an example. The same procedure also applies to
the other 3 priority call types.
ALARMS
Configure ViP Address
Audio message
1.
Access the
Configure VIP address
menu to set the address of the
device which will be called when an alarm call is made.
2.
Select whether to activate the audio message when the call is sent.
◊ Door open
This menu can be used to set the address of the external units to be
monitored.
DOOR OPEN
00002003
C
1.
Access the
Address
menu by pressing the + icon to add the address
of the door to be monitored.
◊
Activate output
This menu can be used to set the operating mode of the relay on board
the monitor.
ACTIVATE OUTPUT
Monostable
Bistable
Normally open
Normally closed
1. Select whether the output is normally closed or normally open.
2.
Select whether the output should be activated in Monostable or
Bistable mode. If you select Monostable mode, you will also need to
set its switching duration time.
◊
Automatic answer
If you activate this option, the monitor will automatically pick up the
audio line on receipt of a call.
◊
Video memory records always
If you activate this option, the monitor will record the video conversation
with the external unit, even if the call is answered.
