34
Modifying parameters/text with the keypad
When necessary, it is possible to con
fi
gure the system and enter or modify data using one of the system keypads. Once you have selected the
item you want to modify, use the keys of the keypad that you are working on to enter the new data.
Navigating the menu
: to navigate the menus displayed by the keypad, use the navigation keys located on the right-hand side of the keypad and
identi
fi
ed by a black triangular arrow indicating the direction of movement (up, down, left and right). Once you have reached the data you intend
to modify, you need to press the con
fi
rm key to go to the next level or enter the new data.
Modifying a numerical value
: numerical values can be entered or modi
fi
ed directly, simply by typing in the desired value, following the format
shown on the display, omitting non-numerical characters, but
fi
lling in all the numerical characters of the proposed format.
e.g. date DD-MM-YY must be entered as DDMMYY; 2 September 2012 will become 020912, without dashes but with a zero at the beginning to
fi
ll the tens digit for the days.
e.g. Setpoint 1.14 is entered as 114, without the decimal point.
Modifying an alphanumeric string
: once you have selected the string to modify (e.g. the description of a zone) the
fi
rst editable character will
start
fl
ashing. The characters can now be entered or replaced using the same writing mechanism as is available on cellphones with pushbutton
keypads. If you press the same key repeatedly, the proposed character will change according to a pre-set sequence. The table below shows the
sequence of characters available for each key.
If you press the C key when the character is
fl
ashing, you can exit the string without saving any changes.
To move around within the string, use the right and left navigation keys.
Pressing the C key while inside the string deletes the character to the left of the
fl
ashing character.
The new character, when necessary, will be entered to the left of the
fl
ashing character.
Press Con
fi
rm to save the changes.
The table below shows the keys and the sequence of characters associated with each
Numerical Key
Associated character sequence
1
. , : ; _ - # * ' @ 1
2
A B C a b c 2
3
D E F d e f 3
4
G H I g h i 4
5
J K L j k l 5
6
M N O m n o 6
7
P Q R S p q r s 7
8
T U V t u v 8
9
W X Y Z w x y z 9
0
(space) 0
The keypad package contains a removable transparent label to be af
fi
xed during programming.
Incorrect application of the label may cause the keys to jam
