14
IP network communication module
In order to be used, once
fi
tted on the switchboard card, it must be connected to a 10/100 compatible hub or to a switch of the same speci
fi
cations,
that allows it to be connected to a data network.
For further details see Appendix 3.
Plug the cable in fully, until you feel it engage, in the only accessible connector of the IP communication module, with the tab facing the front
panel of the switchboard housing. To remove the connector from the module, press the same tab down.
Plugging in and unplugging the MicroSD memory card
The IP communication module is equipped with a compartment for a 2GB MicroSD memory card.
To unplug the memory card from its connector
:
1. Push the card fully into the connector, then
2. release it: the card will be pushed outwards so that you can grip it more easily.
To plug the memory card back into its connector
:
simply insert the card into the connector with the gold-coloured contact not visible, and press it fully home.
Meaning of the LEDs on the IP module
LEDs on the RJ45 network connector
:
Yellow LED ON: link OK
Green LED ON: ACT
LEDs on the IP module – Normal operating mode
D1,
fl
ashing slowly: module operating correctly
D1,
fl
ashing quickly: module operating but SD memory card missing or defective
D2,
fl
ashing: con
fi
rms communication with the switchboard
LEDs on the IP module – Programme updating stage
D1
D2
Meaning
Steadily lit:
Steadily lit:
Updating in progress
Flashing
Inverted
fl
ashing
MicroSD card missing
Steadily lit:
Flashing
MicroSD card missing for a
fi
le necessary for correct operation
NETWORK CABLE
NETWORK
CONNECTORS
MICRO SD
MEMOR
Y
CONNECTOR
