Comdial Scout 900 mxs Page 45 User Manual Download

Page: 45 / 102

To continue conversation on remaining line after other outside
lines have dropped from conference,

•

press line button of remaining party.

To retrieve line from hold and bring party back into conference,

•

press T/C,

•

press line button,

•

press T/C.

To drop out of a conference call between you and two outside
lines (creating an unsupervised conference),

•

dial

and hang up (lines remain lighted and in use until

both outside parties disconnect).

To rejoin an unsupervised conference between two outside
lines,

•

press one of the lighted buttons where conference is taking
place.

NOTE: Conference volume levels are dependent upon the

quality of the external lines.

Conferencing Calls

Summary of Contents for Scout 900 mxs







































































































Search results

Summary of Contents for Scout 900 mxs

Reviews:

Related manuals for Scout 900 mxs

Brands by name

Popular brands

Comdial Scout 900 mxs, User Manual

Search results

Summary of Contents for Scout 900 mxs

Reviews:

Related manuals for Scout 900 mxs

Brands by name

Popular brands